Table of Contents
Advertisement
3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
3.2.5.2 TEXT MENU HIERARCHY
The structure of HMI text menu is similar to the EnerVista 650 Setup in the actual values and settings (view and change)
menus.
The main menu shows the following options:
Table 3–28: GENERAL OVERVIEW OF MAIN TEXT MENU:
NAME
DESCRIPTION
Actual Values
Actual values of all the signals available in device.
Status
measurements, inputs and outputs, etc.
Snapshot events
Visualization of all snapshot events in text mode (two
screens for each snapshot event). In graphical displays
there can be seen in a dedicated screen.
Fault Report
Fault reports information available in HMI (two screens
for each fault report)
View Settings
Visualization of all protection and control settings
available in device.
Change Settings
Menu that allows changing all protection and control
settings available in device. Inputs and outputs settings,
relay configuration and logic configuration are not
available in HMI, only via EnerVista 650 Setup
software.
Date & Time
Date and time visualization and modification by user.
Commands
Operations execution in local mode.
Password
Password menu for settings and commands
Select Main Screen
Selection of default main screen in text menu.
Select Language
Language selection. Between default language (see
ordering code) and English.
< - return
Return to previous level
GEK-113328A
of
protection
and
control
G650 Generator Protection & Control System
3.2 HUMAN MACHINE INTERFACE (HMI)
NAVIGATION IN MENU
Press shuttle key to enter next level. Press ESC to
elements,
return to default main screen.
Press shuttle key to visualize snapshot events in
text menu. Press ESC to return to default main
screen.
Press shuttle key to enter next level. Move L-R to
see all the available fault reports in device. Press
shuttle key to enter particular information for fault
report selected.
Press shuttle key to enter next level. Move L-R to
select submenu. Press ESC to return to previous
level.
Press shuttle key to enter next level. Move L-R to
select submenu. Press esc to return to previous
level.
First mode is visualization. Press again shuttle key
to start modification in date and time. Press ESC to
return to previous level.
Move L-R to pre select operation. Press shuttle key
to select and confirm. Press ESC to return to
previous level.
Move L-R to select submenu. Press shuttle key to
enter next level. Press ESC to return to previous
level.
Move L-R to select the default main screen type.
Press shuttle key to confirm.
Move L-R to select the default language. Press
shuttle key to confirm selection. Switch the relay off
and on.
Press shuttle key to return to previous level.
3
3-35
Advertisement
Table of Contents
