Table of Contents
Advertisement
Date: 2021-01-13
Version: 1.5
4. The assembly and installation of the products may only be carried out by trained mainte-
nance and repair personnel.
5. It may only be used the tools and equipment specified in this manual.
6. All work described here may only be carried out on a pressure- and voltage-free system.
The system must be protected against restarting.
7. The function of the module can only be granted if the assembly is carried out according to
these instructions!
2.4
Risks in Using the Module
Pressurized material!
Technical defects or incorrect handling can cause pressurized material to escape.
Splashing or spraying material can cause severe eye injuries!
Carry out regular visual inspections of the material supply lines. Relieve the working
pressure before starting work. Wear your personal protective clothing.
Contact with solvents, adhesives and sealants!
Contact with eyes or skin causes injury.
Place the relevant safety data sheets in a clearly visible place on the plant and in-
structor the personnel. All work on the material supply lines and adjacent components
must be carried out only by trained, briefed specialists and with sufficient ventilation.
Within the area of the plant, eating, drinking, smoking, etc. is prohibited. Dispose of
spilt or escaped material immediately and according to regulations. The specified
personal protective equipment must be worn when working on the material supply
lines and adjacent components.
© 2021 ABB Automation GmbH |
Operating and installation instructions
Central lubrication unit
Safety
WARNING
WARNING
Page 10 of 25
en
Advertisement
Table of Contents
