Hitachi 3090 G2 Hardware Reference Manual page 99

3. Use CLI to verify that the new node has access to the System Drives. Use sd-list
from the node that you have just replaced.
For example: pn x sd-list where x is the node number in the cluster.
FSS-HNAS-1:$ sd-list
Device Status Alw
----- ------ --- ------ ------
0 OK Yes
1 OK Yes
4 OK Yes
5 OK Yes
6 OK Yes
7 OK Yes
4. If EVS mapping or balancing is required, select the EVS to migrate, assign it to the
preferred node, and then click migrate.
Appendix A: Server replacement procedures
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Finalizing and verifying the server configuration
GiByte Mirror In span
-------
1607 Pri FSS_Pool_1
1607 Pri FSS_Pool_1
390 Pri FSS_AMS200
390 Pri FSS_AMS200
390 Pri FSS_AMS200
390 Pri FSS_AMS200
Span Cap
--------
3214
3214
1560
1560
1560
1560
99