10 Gigabit Ethernet Customer Data Network Ports - Hitachi 3090 G2 Hardware Reference Manual

Figure 13 10 GbE cluster interconnect ports label
Once connected, each 10 GbE port has two indicator LEDs; one green and one amber.
These LEDs provide link status and network activity status information as follows:
Status/Activity (per port)
Status
Activity

10 Gigabit Ethernet customer data network ports

The 10 Gigabit Ethernet (GbE) customer data network ports are used to connect the
server or cluster node to the customer's data network (also called the public data
network). These ports may be aggregated into a 1, 2, 3, or 4 aggregated port.
See the Network Administration Guide for more information on creating aggregations.
The 10 GbE ports operate at speeds of ten (10) gigabits per second. The 10 GbE ports use
enhanced small form factor pluggable (SFP+) optical connectors.
Note: The 10 GbE customer data network ports cannot be used to
interconnect cluster nodes.
Figure 14 10 GbE customer data network ports label
Once connected, each 10 GbE port has two indicator LEDs; one green and one amber.
These LEDs provide link status and network activity status information as follows:
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Green
(on, not
flashing)
Green flashing
Green off
Amber flashing
Amber off
Chapter 5: Hitachi NAS Platform server components
10 Gigabit Ethernet customer data network ports
Meaning
10 Gbps link present
10 Gbps link standby in a redundant configuration
No link
Network activity
No network activity
45