Canon Inner Finisher-J1 Service Manual page 91

9. Install the Innner Cover, and then fasten the 3 screws
loosened at procedure 8.
• 2 Bosses
3x
NOTE:
• Inner Cover is installed using the 2 screws.
• Confirm that the Inner Cover does not rise after fixing
the screws.
10. Install the supplied Delivery Rear Cover.
• 1 Hook
• 1 Screw (RS Tightening; M3x8) (removed at Step
2.)
11. Remove the Face Cover of the host machine.
• 1 Claw
85
6. Installation