Installing The Canopy - Toro TX 1000 Installation Instructions Manual

4

Installing the Canopy

Parts needed for this procedure:
1 Left panel
1 Right panel
1 Windshield
1 Top cover
2
Bolt (5/16 x 1-1/4 inches)
Procedure
1. Install the left and right panels, using the hook
and loop fasteners to secure them to the frame,
as shown in Figure 10
Figure 10
1. Left panel
and Figure 11.
g341667
2. Hook and loop fastener
1. Right panel
2. Install the windshield, using the hook and loop
fasteners to secure it to the panels, front frame
tube, and the windshield bracket
Note:
Secure the windshield to the front frame
tube before securing it to the windshield bracket.
3. Install the top cover, using the hook and
loop fasteners to secure it to the panels and
windshield (Figure
1. Top cover
4. On both sides of the machine, remove the
existing bolt and install a bolt (5/16 x 1-1/4
inches) as shown in
6
Figure 11
2. Windshield
(Figure
12).
Figure 12
Figure 13.
g323638
11).
g323639