Toro TX 1000 Installation Instructions Manual page 5

2. Install the 2 side frame tubes to the rear frame
tube (Figure 5 and
Note:
Install the side frame tubes so that they
bend outward and the holes for the rear posts
are closer to the rear frame tube, as shown in
Figure 5; ensure that the heads of the bolts face
outward.
Figure 6
View from rear; left side shown
1. Bolt (1/4 x 3/4 inch)
2. Fender washer
3. Rear frame tube
3. Secure the 2 side frame tubes and 2 front posts
to the front frame tube
Note:
The front posts are shorter than the rear
posts; ensure that the heads of the bolts face
outward.
Figure 7
1. Post
2. Locknut—1/4 inch (2)
Figure 6).
4. Side frame tube
5. Locknut (1/4 inch)
(Figure 7).
3. Bolt—1/4 x 3/4 inch (2)
4. Side frame tube
4. Install the 2 rear posts to the side frame tubes
(Figure 8).
Note:
Ensure that the heads of the bolts face
outward.
g323640
1. Locknut—1/4 inch (2)
2. Post
5. Install 4 bolts (1/4 x 1 inch) and 4 locknuts (1/4
inch) onto the posts so that the bolt heads face
outward.
g323570
1. Bolt—1/4 x 1 inch (4)
6. With the assistance of another person, install
the posts into the receiver tubes, using the bolts
in the posts as stops
5
Figure 8
3. Bolt—1/4 x 1-1/4 inches
(2)
(Figure 9).
Figure 9
2. Locknut—1/4 inch (4)
(Figure 9).
g323571
g323582