Table of Contents
Advertisement
2.3
CONFIGURATION CHANGES
North Star HSIO-4
As supplied, the HSIO-4 is ready for
immediate connection to four asynchronous
RS-232 terminals or printers.
If you are using the North Star TSS/A
Multi-User System for Application Software
with asynchronous RS-232 terminals and
printers, the HSIO-4 can be installed directly
in the HORIZON without modification.
If you are using different software or using
hardware with different operating
characteristics, you may need to implement
configuration changes and/or programming
routines and should refer to Section 3
(IMPLEMENTING HSIO-4 FEATURES) for general
guidelines and specific instructions before
continuing this installation procedure.
IMPORTANT NOTE
Any necessary configuration
changes must be completed
BEFORE installing the HSIO-4
board in the HORIZON.
6
User/Technical Manual
Advertisement
Table of Contents
