I How To Carry Out Enrollment (Stand-Alone Mode) - Panasonic BM-ET200 Operating Instructions Manual

No.
When your eyes are positioned within the capturing range, all the five
lamps will light up, the short electronic sound "PiPi" is heard, and your
6
eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
It takes approx. 30 seconds (max.) for capturing.
Capturing is finished.
After capturing, the short electronic sound "PiPi" is heard.
The iris server will display the message to the system administrators or operators that
7
the user needs to retry capturing.
After your iris image has been captured, take your eyes off the mirror.
8
Wait until you can confirm the capturing result, as you may need to retry
the capturing.
9
Wait for the directions of system administrators or operators, as it will take approx.
10 seconds until the recognition result is output.
Follow the direction by the system administrators or operators.
10

I How to Carry Out Enrollment (Stand-alone Mode)

The following is how to control the iris reader when your (the user's) iris data is enrolled in the iris reader.
Notes:
• Follow the direction of system administrators or operators when you carry out enrollment.
• In some cases, you may need to retry capturing when enrolling your iris data.
Wait until you can confirm the capturing result.
• Depending on the settings by the system administrators, voice guidance (voice guidance and/or shutter sound) may not
be output.
No.
Stand (Sit down) in front of the iris reader.
1
Follow the directions of system administrators or operators.
If you are wearing glasses/sunglasses, take them off.
2
Procedure
Procedure
reject accept
reject accept
reject accept
71