Precautions - Panasonic BM-ET200 Operating Instructions Manual

Precautions

General safety requirement:
For Installation
Refer all work related to the installation of the apparatus to
qualified service personnel or system installers.
Consult an expert for help in evaluating load bearing
capacity of the installation surface and structure. If the sur-
face is not strong enough, the apparatus may fall down.
Refer to the apparatus specifications for weights.
To avoid fire or personal injury:
• Do not drop metallic parts through slots.
This could permanently damage the apparatus.
• Do not attempt to disassemble the apparatus.
There are no user-serviceable parts inside. Panasonic
is not responsible for regulatory compliance of a disas-
sembled Panasonic apparatus by unauthorized person-
nel. Contact qualified service personnel for mainte-
nance.
• Do not strike or shake the apparatus.
Handle the apparatus with care, or it could cause the
trouble of it.
• Do not expose nor operate the apparatus in
wet/damp conditions.
Take immediate action if the apparatus gets wet. Refer
servicing to qualified service personnel. Moisture could
damage the apparatus and also cause electric shocks.
• Do not use strong or abrasive detergents when
cleaning the apparatus.
Use soft and dry cloth to clean the apparatus when it is
dirty. When the dirt is hard to remove, use a mild deter-
gent and wipe gently.
• Do not use the apparatus beyond operating require-
ments.
It is designed to operate properly for environment spec-
ified below:
Temperature
Humidity
Source voltage
Important notes specific to the apparatus:
• This unit has no power switch.
Power is supplied from an external 12 V DC/24 V DC
power-supply device. Refer to service personnel for
how to turn on/off the power.
Note: While the power is turned off, recognition and
entrance will NOT be available.
10
0 °C to +40 °C {32 °F to 104 °F}
30 % to 90 % relative humidity, non-
condensing
12 V DC/24 V DC
• This unit must be powered by a UL Listed access
control power-limited power supply, capable of
4-hours of standby power.
• Adopting tamper-proof structure.
Refer to service personnel for relocating or servicing
the apparatus.
As the unit has been designed in tamper-proof struc-
ture, buzzer sound will be activated with alarm notifica-
tion when you try to open the front cover or detach the
apparatus from the wall. Then, recognition will become
unavailable, the alarm notification will also be sent to
the iris server, and the stored data (user information
and reader settings) may be erased from the unit.
• Use of near-infrared ray
Near-infrared ray is used when iris data are captured
by the apparatus. The near-infrared ray is compliant
with the radiological safety standard of IEC60825-1.
• Indication label
Refer to the indication placed on the bottom of the
apparatus as to the indications of equipment classifica-
tion and power source, etc.
• This apparatus is not designed to prevent theft.
The apparatus is designed to perform roles of capturing
personal iris data, of recognizing individuals and of pro-
ducing output signals
entrance/gate security, you must use the apparatus
together with other security system or devices including
electric locks.
Panasonic is NOT RESPONSIBLE FOR ANY CRIME OR
TROUBLE CAUSED BY USING THIS APPARATUS.
• In some cases, recognition or enrollment doesn't
work properly.
It could be invalid in recognition or enrollment when the
apparatus has difficulty in getting iris information due to
dirt in front of lens, reflection of glasses or insufficiency
of physical requirement.
• Iris data is a nature of privacy.
Take enough care not to leak the data out of the iris
server. It is also recommended that you should get an
agreement from a person to register his or her data.
only. To ensure your