Panasonic BM-ET200 Operating Instructions Manual page 59

No.
Enter one of the following.
Restore user information:
Press [0] [enter].
Back up user information:
Press [1] [enter].
3
The voice guidance will say, "Registration has been completed."
Note: When the voice guidance says, "Registration has been failed.", retry Step 2. (If
the external storage device does not have the sufficient capacity, or if the storage
device is damaged, the file will not be output, and the voice guidance says,
"Registration has been failed.")
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
4
say, "Registration has been failed.", and the iris reader will return to the status before
operation.
G Back up or Restore Reader Setting
The following is how to back up or restore reader setting.
Notes:
• Before restoring reader setting, save a file as "SystemInfo.bin" in the external storage device. If this file does not exist, it is
impossible to restore the reader setting.
• The name of file that is saved when backup is performed becomes "SystemInfo.bin".
No.
Press [+] [0] [7] [enter].
1
The short electronic sound "PiPi" is heard.
Connect an external storage device and a numeric key with the USB hub
to the iris reader.
2
Note: Before restoring reader setting, save a file as "SystemInfo.bin" in the external
storage device.
Enter one of the following.
Restore reader setting:
Press [0] [enter].
Back up reader setting:
Press [1] [enter].
3
The voice guidance will say, "Registration has been completed."
Note: When the voice guidance says, "Registration has been failed.", retry Step 2. (If
the external storage device does not have the sufficient capacity, or if the storage
device is damaged, the file will not be output, and the voice guidance says,
"Registration has been failed.")
Procedure
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
59