Panasonic BM-ET200 Operating Instructions Manual page 55

G Register the PIN
The following is how to register the PIN of user who has been already registered in the database.
No.
Press [+] [1] [1] [enter].
1
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to register the PIN.
Example: When the ID is 01, press [0] [1] [enter].
The short electronic sound "PiPi" is heard.
2
Note: When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
Enter the PIN (4-digit).
Example: When the PIN is 1234, press [1] [2] [3] [4] [enter].
The short electronic sound "PiPi" is heard.
3
Note: When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
Enter the PIN (4-digit) again.
Example: When the PIN is 1234, press [1] [2] [3] [4] [enter].
The voice guidance will say, "Registration has been completed."
4
Notes:
• When you register the PIN of another user, repeat Step 2 to 4.
• When the voice guidance says, "Registration has been failed.", retry Step 2.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
5
say, "Registration has been failed.", and the iris reader will return to the recognition
mode.
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
55