Canon 0585C006 Instruction Manual page 63

[: Shooting in a Different Flash Mode for Each Group
E
A
B
Wireless flash shooting using the <[> flash mode cannot be performed
with cameras released up to 2011 or EOS REBEL T5/1200D. Shooting with
up to 3 groups (A, B and C) will be applied (p.60).
When using an EOS DIGITAL camera
Ceiling
released in and after 2012, such as the
EOS-1D X, you can shoot in a different
flash mode set for each firing group with
D
up to 5 groups (A, B, C, D, and E).
The flash modes that can be set are
" E-TTL II/E-TTL autoflash, # Manual
flash, and $ Auto external flash metering.
When the flash mode is " or $, exposure
C
is controlled to result in standard exposure
for the main subject as a single group.
This function is for advanced users who
are very knowledgeable and experienced
in lighting.
Set the flash mode to <[>.
1
Press the <

<S> cross keys of the sender unit.
Turn <9> to select <S>, then

press <8>.
Set the firing group of the
2
receiver units.
Operate and set the receiver units

one by one.
Press <8>.

Turn <9> to select the firing group

symbol, then press <8>.
Turn <9> to select <a>, <b>,

<c>, <d>, or <e>, then press
<8>.
Set the firing group (A, B, C, D, or E)

for all the receiver units.
E > button of the
63