E: Setting The Flash Coverage - Canon 0585C006 Instruction Manual

e: Setting the Flash CoverageN
Flash coverage (the range covered by the flash light) can be set
automatically or manually. With the <L> (automatic) setting, the flash
coverage is adjusted automatically according to the focal length
(shooting angle of view) of the lens in use and the image sensor size
(p.22). With the <d> (manual) setting, you can manually set flash
coverage in the range of 24 to 105 mm.
When you set the flash coverage manually, set the same or a wider

coverage than the angle of view for shooting to avoid darkening the
periphery of the picture.
When a lens with a focal length less than 24 mm is attached, the

<O> warning is displayed on the LCD panel. When using a camera
with the image sensor size smaller than full-frame, the <O>
warning is displayed when the actual shooting angle of view is wider than
the angle of view of a 24mm lens.
32
Press the <H> button.
1
Press the <

<S> cross keys.
Set the flash coverage.
2
When you want to set the flash

coverage automatically, set <X>.
When you want to set the flash
coverage manually, select a number
(indicating the focal length in mm).
Turn <9> to select the flash

coverage, then press <8>.
> button of the
H