Canon 0585C006 Instruction Manual page 53

The <D> Lamp
You can check the transmission status by viewing the color of the
<D> lamp.
Color Status
Green Lit
Lit
Red
Blinking
If the transmission channels of the sender unit and receiver unit are

different, the receiver unit will not fire. Set both to the same number or
set both to "AUTO".
If the wireless radio IDs of the sender unit and receiver unit are different,

the receiver unit does not fire. Set to the same number.
Sender Flash Firing ON/OFF
You can set whether or not to fire the sender unit as a wireless flash that
controls the receiver unit. When sender flash firing is set to ON, the
sender unit is fired as firing group A.
Description
Transmission OK
Not connected
Too many units
Error
Set sender flash firing to ON or
OFF.
Press <8>.

Turn <9> to select the flash firing

symbol, then press <8>.
Turn <9> to select sender flash

firing ON or OFF, then press <8>.
Action
Check the channel and ID.
Change the sender and receiver unit total
to 16 or less.
Turn the sender unit and receiver unit off
and on again.
j: Sender flash firing ON
` : Sender flash firing OFF
Wireless Settings
–
53