Canon 0585C006 Instruction Manual page 52

Wireless Settings
Scanning and Setting the Sender Unit Transmission
Channels
You can scan the radio reception status and set the sender unit's
transmission channel automatically or manually. When the channel is
set to "AUTO", the channel with the best reception signal is set
automatically. When setting the channel manually, you can reset the
transmission channel while referring to the scan results.
Scanning when "AUTO" is set
Scanning when a channel between Ch. 1 and 15 is set
52
Run the scan.
Press the <1> button.

Turn <9> to select <W>, then

press <8>.
Select <;>.


The scan is performed, and the channel
with the best reception signal is set.
Run the scan.
1
Press the <1> button.

Turn <9> to select <W>, then

press <8>.
Select <;>.


The scan is performed and the
reception status is displayed in a graph.
The higher the peak of the channel in

the graph, the better the radio
reception signal.
Set a channel.
2
Turn <9> to select a channel from

Ch. 1 to 15.
Press <8> to set the channel.
