Canon 0585C006 Instruction Manual page 56

a: Fully Automatic Wireless Flash Shooting
Firing group control
Receiver flash ready
56
Set the flash mode to <
5
Press the <

<S> cross keys of the sender unit.
Turn <9> to select <Q>, then

press <8>.
The receiver unit is set automatically

to <a> during shooting via the
control from the sender unit.
Check that the firing group control is

set to <8>.
Check the transmission status
6
and charge status.
Check that the <D> lamp is lit in

green.
When the receiver flash is ready, the

AF-assist beam emitter blinks at
approx. 1-second intervals.
Check that the <Q> receiver flash-ready

icon is lit on the sender unit's LCD
panel (<G> is not displayed).
For the sender unit's LCD panel

illumination, see page 54.
Check that the sender unit's flash-

ready lamp is lit.
Check the performance.
7
Press the sender unit's test flash button.


The receiver unit fires. If it does not
fire, check that it is placed within the
transmission range (p.46).
Take the picture.
8
Set the camera and take the picture

in the same way as with normal flash
shooting.
a
E > button of the
>.