Water Filter; Mounting The External Filter Onto The Wall - Blomberg BRFD2650SS5VFLR Operating Instructions Manual

Installation
A
WARNING:
valve, make sure that there is no leakage
at both connection points of the water
hose. If there is a leakage, turn off the
valve immediately and tighten all joints
again using a spanner or a pliers.
A
WARNING:
valve connector is available and completely
turned off on your cold water mains line.

3.10 Water filter

(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
3.10.1 Mounting the external
filter onto the wall
1. First, determine the location to mount the
external filter.
2. Then, determine the distance between the
filter and the tap and filter and the water inlet
respectively. Prepare hoses at required lengths.
3. Mount the filter connection kit onto the wall by
using a screwdriver and attach the filter.
After turning on the water
Make sure that standard 1/2"
10 / 32 EN
Refrigerator / User Manual