Water Filter; Attaching The Internal Filter Into The Refrigerator - Blomberg BRFD2230SS User Manual

Installation

3.10 Water filter

(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on the model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
Filter end of life warning.
3.10.1 Attaching the internal
filter into the refrigerator
Filter replacement consists of 2 parts. These
are physically changing the filter and making
adjustments on the display.
1. Press "Ice Off"
by pass cover.
2. Slide the water filter cover forward.
3. Remove the water filter bypass plug by turning it
downwards.
4. Seat the water filter cover into the mechanism and
push forwards to lock it in place.
5. Press "Ice Off" button on the display again to exit
this mode.
A
WARNING:
is enabled before removing the by-pass
cover.
C
It is normal that a few drops of water drip
after the cover has been removed.
button before removing the
Ensure that the Ice Off mode
C
Water filter must be replaced every 6
months. Make sure that the "Ice Off" mode
is enabled before removing the filter.
A
WARNING:
foreign particles in the water. It does not
purify water from microorganisms.
10 /37 EN
Water filter cleans some
Refrigerator / User Manual