Panasonic DBS Series Programming Manual page 22

Panasonic Digital Business System - Programming Manual
April 1997
Live Key Pad Setting
This step switches the live key pad facility of the VBD range of handsets on or off. It has no effect
on other extensions. The live key pad allows dialling without having to go off hook or press the
On/Off key.
Note: When dialling out a line must still be selected using a line key, the LINE key or line access
code.
Trunk To Trunk Transfer By On Hook
Enable or disable on hook transfer for trunk to trunk calls. If Enabled calls can be transferred from
trunk to trunk by going on hook at then of transfer dialling or during conference modes. If disabled
the transfer key (*6) must be used to transfer from trunk to trunk.
Private Wire To Trunk Transfer
The operation of this step has been modified in software levels later than CPC-EX v1.5. It now
controls the connection of trunks to private circuits ( AC15 & DC5 ). When allowed Private Circuits
can access outgoing lines on the system to make and transfer calls.
Related Step: FF1 2# 5# - Cross Connection Permissions
FF3 42# - Trunk To Trunk Transfer By On Hook By Extension
FF1 2# 1# 42# (0-1)#
(0-1)#
0# Live key pad feature disabled
1# Live key pad feature enabled
FF1 2# 1# 43# (0-1)#
(0-1)#
0# Disable
1# Enable
FF1 2# 1# 43# (0-1)#
0# Allow
1# Barred
22
Issue 15
CPC-EX 1.0
CPC-EX 1.0
CPC-EX v1.5