Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
DTMF Signal Back Tone to voice Mail
0#:
Back Tone sent
1#:
No back Tone on Exchange line or E&M
2#:
No back Tone
This specifies weither the DTMF signal back tone/call forward ID can be heard by the calling party
when the voice mail answers and the pre-programmed ID is sent out to the voice mail.
Incoming Line Name Display Mode
0#
1#
Selects weither or not alphanumeric line names are displayed during incoming ringing.
System Speed Dial Mode
Selects weither 2 groups of 90 SSDs, numbered 00 ~ 89, are used or 1 group of 180, numbered
100~189 and 200~289, is used. When changed a power off/on reset is required for the changes to
take effect. Numbers stored in the SSDs will not be erased when this setting is changed.
Internal DTMF From SSD Or PSD Backtone
0#
1#
Sets weither memory dialled internal DTMF tones can be heard by the dialling extension user.
Suppression Of Call Forward Indication
0#
1#
Selects weither call forward indicators on LCD and BLFs are displayed when the feature is used.
This is a system mode setting.
FF1-2#-1#-37#-(0-2)#
FF1 2# 1# 38# (0-1)#
Line name NOT displayed
Line name displayed
FF1 2# 1# 39# (0-1)# (P)
0#
2 x 90 SSD groups
1#
1 x 180 SSD group
FF1 2# 1# 40# (0-1)#
Tones can be heard
Tones cannot be heard
FF1 2# 1# 41# (0-1)#
Indication Suppressed
Indication NOT Suppressed
[V.M. BACK TONE]
[INCOM TRK NAME]
[SSD NO. SELECT]
[INT BACK TONE]
[CF NO ANS DISP]
21
Issue 15
4.0
ISDN 1.2 / 4.1
ISDN 1.2 / 4.1
ISDN 1.2 / 4.1
ISDN 1.2 / 4.1
Advertisement
Table of Contents
