Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Group MCO0 Line Access Code
The numbering plan of the DBS can be altered to allow dial 9 access to line group 0 or the
operator. For UK use it is recommended that this step be left in its default setting.
FF1-2#-1#-33#
[NOT USED]
Setting up pick-up group
0#:
Paging Group
1#:
Hunting Group
2#:
Pick-up Group
This specifies which type of system group is used for the Group Call Pick-up (70) function.
Related steps
FF3 18# 25# - Paging Group
FF4 4# - Hunting Group
FF4 6# - Pick-Up Group
Voicemail termination signal setting
0#:
No Tone
1#:
Continuous DTMF # Tone
2#:
Busy Tone
This programming option is dedicated to Voice Mail applications. It specifies the termination
signal which is sent to Voice Mail ports when the internal calling party terminates the call by
hanging up. The signal remains until the voice mail hangs up.
Hold Pick-up by HOLD key operation
0#:
Held call retrieval Not available
1#:
Available
This specifies how the HOLD key operates on digital keysets. When set to 1# pressing the HOLD
key when a call is on hold will return to the call otherwise the appropriate line key must be used.
FF1 2# 1# 32# (0-1)#
(0-1)#
0#
Line access by 9 / Operator call by 0
1#
Line access by 0 / Operator call by 9
FF1-2#-1#-34#-(0-2)#
FF1-2#-1#-35#-(0-2)#
FF1-2#-1#-36#-(0 or 1)#
[PICK UP GRP SEL]
[V.M. EOT]
[HOLD IN RBT]
20
Issue 15
CPC-EX 1.0
3.1
4.0
4.0
Advertisement
Table of Contents
