Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
DDI Hunt Group Member No Answer Timer
Select the no answer time for extension in the specified DDI hunt group to enable No Answer
hunting.
An incoming call will ring for the duration of the member no answer timer and if unanswered,
move on to the next member and restart the timer.
If the member no answer timer is set to 0, the busy hunting mode will be used ( the hunting mode
used in software levels up to v4.x and ISDN 1.x ).
If all members are busy the call will wait at the extension it was directed to until the member no
answer timer elapses at which point it will hunt again.
FF4 10# (1-16)# 17# (0-15)#
(1-16)#
Hunt Group
(0-15)#
0#
Busy Hunting
1#
4 sec
2#
8 sec
3#
12 sec
4#
16 sec
5#
20 sec
6#
24 sec
7#
28 sec
8#
32 sec
9#
36 sec
10#
40 sec
11#
44 sec
12#
48 sec
13#
52 sec
14#
56 sec
15#
60 sec
104
Issue 15
CPC-EX 2.1
Advertisement
Table of Contents
