PowerXL VORTEX DUAF-10-LA User Manual page 38

Instructions for Use
Assembling the Baskets
For Large (10-Quart/9.5 liters) Basket
1. Remove the baskets from the Main Unit Housing.
2. If present, lift the Fry Trays from the baskets and remove the Basket Dividers.
3.
Place the baskets against each other so that the open sides of the baskets are
aligned. Align the U-Channel Connector with the groove slots on both sides
of the baskets simultaneously (see Fig. 2). Slide both sides of the U-Channel
Connector downward at the same time while applying outward pressure to
both sides of the U-Channel Connector so that the U-Channel Connector
attaches to both groove slots at the same time (see Fig. 3).
NOTE: To remove the U-Channel Connector, pull it out of position slowly and
evenly.
4. Push the Fry Trays into the baskets so that the Rubber Bumpers are pressed
against the bottom of the baskets.
NOTE: Assemble the
Basket Dividers with
with the arrow pointing
downward.
Fig. 1
Fig. 2
38
DUAF-10-LA_29334_SE_IB_A.indd 38 DUAF-10-LA_29334_SE_IB_A.indd 38
Fig. 3
10/31/22 2:20 PM 10/31/22 2:20 PM