PowerXL VORTEX DUAF-10-LA User Manual page 45

Cleaning & Storage
Cleaning
Clean the appliance after each use. The
baskets and the Fry Tray are coated with
a special nonstick surface. Never use
abrasive cleaning materials or utensils
on these surfaces. DO NOT soak or
submerge the appliance in water or wash
in a dishwasher.
1. Remove the Power Cable from
the wall socket and be certain the
appliance is thoroughly cooled
before cleaning.
2.
Wipe the outside of the appliance
with a warm, moist cloth and mild
detergent.
3. Clean the baskets and the Fry Tray
with hot water, a mild detergent, and
a nonabrasive sponge.
NOTE: The Fry Tray is dishwasher
safe.
TIP: Should the Fry Tray contain
difficult-to-remove food particles,
soak in hot, soapy water for
10 minutes.
NOTE: The rubber bumpers on the
Fry Tray are part of the Fry Tray and
should generally not be removed.
However, if the rubber bumpers
need to be cleaned, they can be
removed and reattached: To remove
the rubber bumpers, locate the
Storage
1. Unplug the appliance and let it
cool down thoroughly.
2. Make sure all components are
clean and dry.
3. Place the appliance in a clean,
dry place.
NOTE: For storage, the U-Channel Connector
may be mounted on the placeholder on the
back of the appliance as shown.
DUAF-10-LA_29334_SE_IB_A.indd 45 DUAF-10-LA_29334_SE_IB_A.indd 45
capped end of the bumpers and
push the capped end off of the Fry
Tray. There will be some resistance,
but keep pushing until the rubber
bumpers come off of the Fry Tray.
Take note of the slot on which the
bumpers were sitting. To reattach the
rubber bumpers, align the hole in the
rubber bumpers with the slots from
which the rubber bumpers were
removed. Slide the rubber bumpers
all the way back onto the slot on the
Fry Tray.
4. Clean the inside of the appliance
with hot water, a mild detergent, and
a nonabrasive sponge.
5.
If necessary, remove unwanted food
residue from the heating element
with a soft cleaning brush.
6. Rinse the appliance with a clean,
damp cloth. Use a clean, dry
cloth to dry the appliance interior.
Do not leave standing water in
the appliance.
7.
If any other service needs to be
performed, contact Customer
Service, using the contact
information on the back of
this manual.
45
10/31/22 2:20 PM 10/31/22 2:20 PM