Instructions For Use - PowerXL VORTEX DUAF-10-LA User Manual

Instructions for Use

Before First Use
1. Read all material, warning stickers, and labels.
2. Remove all packing materials, stickers, and labels from the appliance.
3.
Wipe the inside and outside of the cooking appliance with a warm, moist
cloth and mild detergent. Rinse with a clean, moist cloth. Never submerge
the appliance. Hand-wash all cooking accessories.
4. Place the appliance on a stable, horizontal, and level surface that is heat
resistant. Ensure that the appliance is used in an area with good air circulation
and away from hot surfaces and any combustible materials. Do not place on a
stove top.
5. Before cooking food, preheat the appliance for a few minutes to allow the
appliance to burn off the manufacturer's protective coating of oil. Wipe the
appliance with warm, soapy water and a washcloth after this burn-in cycle.
6.
Place the Fry Tray in the Basket. Slide the Basket into the appliance. If the
Basket is placed properly, it will click into place.
NOTE:
The appliance cooks using hot air. Do not fill the Basket with oil or frying
fat. Do not put anything on top of the appliance. This disrupts the airflow and
affects the cooking results.
Assembling the Baskets
For Double (5-Quart/4.7 liters) Baskets
1.
Remove the baskets from the Main Unit Housing.
2. If present, lift the Fry Trays from the baskets, and remove the U-Channel
Connector.
3. Orient a Basket Divider so that the arrow is outside of the basket and
pointing downward (see Fig. 1). Push the Basket Divider all the way into the
basket's groove slot.
4. Push the Fry Tray into the basket so that Rubber Bumpers are pressed against
the bottom of the basket.
5. Repeat steps 3 and 4 for the other basket.
DUAF-10-LA_29334_SE_IB_A.indd 37 DUAF-10-LA_29334_SE_IB_A.indd 37
Scan this QR code with your tablet or smartphone's
camera to watch a quick video tutorial showing you
how to assemble the Fry Baskets.
37
10/31/22 2:20 PM 10/31/22 2:20 PM