Appendix B - Specifications - Ns3300 Display - NorthStar NS3300 AutoPilot Installation Manual

Appendix B - Specifications - NS3300 Display

Electrical:
Supply voltage: 10.5 to 30.5 V DC.
Supply current ( at 13.8 V):
Other optional instruments: refer to the instrument's
Reference manual.
Interfaces
NavBus: connection to MCU and other Northstar
instruments.
NS3300 Display unit power/data cable wires:
5
1
6
4
7
3
8
2
5
1
6
4
7
3
8
2
30
Without backlighting: 160 mA.
With full backlighting: up to 390 mA.
Wire Signal
color
Red Power positive, 10.5 to 30.5 V DC
Black Power negative
Orange NavBus +
Blue NavBus -
Yellow Factory use (isolate, do not cut)
White Factory use (isolate, do not cut)
Green External alarm, switched to ground, 30 V DC and 250 mA max.
Brown +9V out
Wire Signal
color
Red Factory use (isolate, do not cut)
Black Power negative
Orange NavBus +
Blue NavBus -
Yellow Factory use (isolate, do not cut)
White Factory use (isolate, do not cut)
Green Factory use (isolate, do not cut)
Brown +9V out
Standards compliance:
EMC compliance:
USA (FCC): Part 15 Class B
Europe (CE):IEC 60945:2002 Clause 9 & 10.
New Zealand and Australia (C Tick):
IEC 60945:2002 Clause 9.
Environment:
IPx6 and IPx7 - completely waterproof.
Black connector - Power and MCU
Green connector - NavBus expansion
Northstar NS3300 Pilot System Intallation