SUN2000-4.95KTL-JPL0
User Manual
Follow-up Procedure
Before removing the positive and negative connectors, ensure that the DC SWITCH
is set to OFF.
To remove the positive and negative connectors from the solar inverter, insert an
open-end wrench into the notch and press the wrench with an appropriate force.
Figure 5-12 Removing a DC connector
5.6 Connecting a Signal Cable
Context
When laying out a signal cable, separate it from the power cable to avoid strong
signal interference.
Figure 5-13 Signal cable port
Issue 04 (2023-02-17)
WARNING
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
44