Table Of Contents - Toro Sand Pro 3040 Operator's Manual

Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2018-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
Safety and Instructional Decals .......................... 3
Setup ........................................................................ 4
1 Assembling the Rake ....................................... 5
2 Mounting the Tooth Rake to the Traction
Unit ................................................................. 5
3 Adjusting the Link Assembly ............................ 6
Product Overview ..................................................... 8
Operation .................................................................. 8
Training Period ................................................... 8
Raking Tips......................................................... 8
Raking Pattern.................................................... 8
Entering and Leaving the Trap ............................ 9
Adjusting the Rake Angle.................................... 9
Adjusting the Trowels ......................................... 9
Adjusting the Rake Stop Bolts........................... 10
Using Drag Weights.......................................... 10
Setting the Transport Position........................... 10
Inspecting and Cleaning the Rake and
Traction Unit.................................................. 10
Maintenance ............................................................11
Greasing the Attachment Adapter......................11
g003425
2
Figure 2
Safety-alert symbol
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g000502