Product Description - ABB INCA 1EC Tina Manual

3

Product description

INCA Tina emergency stop button/safety stop button is designed for mounting in a 22.5-mm
opening in an enclosure.
INCA Tina is adapted for connection to the DYNlink safety circuit monitored by a safety
controller or a safety PLC.
INCA 1 Tina v2 is an emergency stop with a red button.
INCA 1S Tina v2 is a safety stop with a black button.
INCA 1EC Tina is an emergency stop with StatusBus configured for static information output,
but it switches to StatusBus configuration when StatusBus communication is detected on
the information output.
A LED in the top of the button indicates the present status of the safety circuit.
All INCA Tina models are intended for use in safety circuits in accordance with EN 60204-1.
Warning!
Note!
2TLC172163M0201 Rev.F
The emergency stop/safety stop normally needs to be supplemented with
other safety functions such as an interlock switch. Needs according to risk
analysis.
The emergency stop/safety stop shall be used only in cases of emergency
and shall not be used for a normal stoppage of the machine.
6