Step 1: General Setup - Toro SitePro 2000 Getting Started Manual

G e t t i n g I n i t i a l S t a r t e d S i t e P r o
STEP 1:
GENERAL SETUP
Follow these steps to set up the general
configuration of SitePro:
Select the language (Setup >
Language/Units)
Select the language used on the
SitePro screens.
Select units of measure (Setup >
Language/Units)
Select the units of measure you
prefer for calculations and display.
Select control system hardware
(Setup > Hardware> System)
Choose the type of Toro field
hardware/satellites used in your irrigation system.
Only one type of hardware can be selected. Throughout SitePro, features will be
grayed out if they do not apply to the selected hardware type.
Select the communications configuration (Setup > Hardware > Communications)
Define the wire, telephone and/or radio parameters used between the SitePro central
and your field hardware.
System Settings: Choose the update time (Setup > System Settings > Update Time)
Set the control system update time and water-time window. You can also perform a
manual update or change the field time.
System update time must be at least 60 minutes prior to the first master sequence
start time.
System Settings: Configure the home screen (Setup > System Settings > Site Setup >
Home Screen)
Customize the look of your home screen.
System Settings: Configure the map coordinates (Setup > System Settings > Site >
Setup >Map Coordinates)
Enter information to calculate sunrise and sunset if you want to use them for irrigation
start times.
System Settings: Select the flow management algorithm (Setup > System Settings >
Site Setup >Flow Management)
Select either Program-based flow or Station-based flow. (For Network DR2, Network CDS
and OSMAC field hardware systems only.)
System Settings: Define the alarm notice (Setup > System Settings > Alarm Notice)
Define the action SitePro will provide to notify you of an alarm.
System Settings: (Setup > System Settings > Upload Select) Select satellite and station
information upload parameters. (For Network 8000 and Network LTC Plus systems only.)
12
SitePro Central Control System
M a n u a l S e t u p
—
—
—