Step 6: Set Up The Advanced Menu Items; Step 7: Daily Operations - Toro SitePro 2000 Getting Started Manual

I n i t i a l S i t e P r o
STEP 6:
SET UP ADVANCED MENU ITEMS
Depending on the components of your cen-
tral control system, you may need to set up
advanced features of SitePro. These include
multi-manual groups, switches, control codes,
sensors/alarms and alarms/responses.
Set up any advanced program features
(Setup > Advanced)
• Multi-Manual Groups (Network 8000 field hardware only)
• Switches
• Control Codes (Network 8000 field hardware only)
• Sensors/Alarms (Network 8000, Network DR2,
Network LTC, Network LTC Plus and Network CDS field hardware only)
• Alarms/Response
For more information on the programming and operation of SitePro, refer to the
on-line Help screens.

STEP 7: DAILY OPERATIONS

Use the speed buttons at the top for quick access to the functions you use on a daily basis.
Percent Adjust Button — Make manual percentage adjustments of run times.
Programs Button — Access the irrigation programs function of SitePro. Define and
review programs and start times.
Run-Time Review Button — Check the length of time water is scheduled to run for
stations.
Projected Flow Button — Graphically display the projected flow of a program.
Congratulations! You have successfully programmed SitePro and are now ready to irrigate. If
you need further help, or want to make sure you are optimizing your system, use SitePro's
extensive on-line Help screens.
S e t u p
SitePro Central Control System
17