Table of Contents
Advertisement
Initial SitePro Setup
• Use the Irrigation Method tables above to guide you on the amount of information you
need to provide SitePro to meet your irrigation needs. On Step 2: Build the Irrigation
Methods Database outlined below, the symbols
items you need to complete for your selected irrigation method.
= Basic
I
II
• Refer to the Quick Reference Guide pages 2–8 for the location of screen menus and buttons.
• The on-line help screens can provide you with additional information about SitePro.
Sprinkler Data Required:
• Types
• Locations
• Pressure
Sprinkler Data Required:
• Types
• Locations
• Pressure
Automatic Calculation of Station Run Times Based on ET
Sprinkler Data Required:
• Types
• Locations
• Pressure
• Arc
• Pattern
• Distance
11
G e t t i n g
I n i t i a l
(cont.)
= Intermediate
= Advanced.
III
I
BASIC IRRIGATION METHOD
Direct Adjustment of Station Run Times
Program Setup:
• Daily run times for the
sprinklers are assigned
to the program.
II
INTERMEDIATE IRRIGATION METHOD
Adjustment of Station Run Times Based on ET
Program Setup:
• Daily run times for the
sprinklers are assigned
to the program.
• A reference ET is
associated with the
run times.
III
ADVANCED IRRIGATION METHOD
Program Setup:
• Define an ET source
for the program.
S i t e P r o
S t a r t e d
M a n u a l
S e t u p
I
,
II
and
III
indicate the
Operation:
• You assign run times to
the sprinklers. Make
manual percentage
adjustments to change
run times.
Operation:
• You assign run times to
the sprinklers based on a
reference ET. Run times
can be automatically
adjusted by the daily ET
(operational ET).
• Define an ET source
for the program.
Operation:
• Run times are calculated
automatically based on
the ET data from the
selected ET source and on
the sprinkler configuration.
• Define an ET source for
the program.
SitePro Central Control System
11
Advertisement
Table of Contents
