Table of Contents
Advertisement
(5)
Reading of backup data is performed, and equipment will be rebooted, if the O.K.
button is clicked, since the message of the following figure is displayed after a while.
Reading of backup data is an end after a reboot
Note: This case has time in equipment starting depending on the contents of backup data.
This case has time in equipment starting depending on the contents of backup data.
This case has time in equipment starting depending on the contents of backup data.
This case has time in equipment starting depending on the contents of backup data.
When backup data is read at the time of soft upgrade, time borrows from equipment starting
When backup data is read at the time of soft upgrade, time borrows from equipment starting
When backup data is read at the time of soft upgrade, time borrows from equipment starting
When backup data is read at the time of soft upgrade, time borrows from equipment starting
10 minutes to about 15 minutes.
10 minutes to about 15 minutes.
10 minutes to about 15 minutes.
10 minutes to about 15 minutes.
★ Error message when installing backup data ★
Displayedwhen the CD-RW disk is not prepared
for backup data due to any of the following
reasons:
•
The CD-RW disk is not set to CD drive.
•
The CD-RW disk has no backup data.
* Clicking the "OK" button returns to the
"Backup data" menu.
3 - 8
（５）
（５）
（５）
（５）
L1E-EA0229
Advertisement
Table of Contents
