Connection Example; Installation - Siemens SINAMICS S120 Manual

5.5.4

Connection example

Figure 5-8
5.5.5

Installation

1. Release the screws and remove the protective cover from the Control Unit.
2. Place the Option Board into the slot on the Control Unit and fix it in place using the screws.
Screws: M3
Tool: Torx T10 screwdriver
Tightening torque: 0.8 Nm (7.1 lbf in)
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Connection example for TB30
Option boards
5.5 Terminal Board TB30
111