Figure 6-1 Removing The Bts3900E - Huawei BTS3900E GSM User Manual

BTS3900E GSM
User Guide

Figure 6-1 Removing the BTS3900E

Step 5 Hold the BTS3900E bottom with both hands and lift the BTS3900E to remove it from the main
fixture.
Step 6 Install a new BTS3900E. For details on the installation procedure, see the BTS3900E GSM
Installation Guide.
Step 7 Connect all the BTS3900E cables.
Step 8 Check the settings of the DIP switch on the BTS3900E.
Step 9 Set the corresponding MCB on the auxiliary power supply device to ON.
Step 10 Check the state of the LEDs on the BTS3900E panel.
Step 11 Click Board in the left pane of the Site Maintenance Terminal System window, and then
double-click Board Management in the right pane of the window. The Board Management
window is displayed.
Step 12 In the Board Management window, check the operating status of the BTS3900E.
If...
The BTS3900E icon is green
The BTS3900E icon is not green
Issue 01 (2010-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 BTS3900E Maintenance
Then...
The BTS3900E operates normally. Then, go
to the next step.
The BTS3900E does not operate normally.
Then, reinstall the BTS3900E.
6-5