BTS3900E GSM
User Guide
5.2.6 RF Cable of the BTS3900E
This describes the RF jumpers and RF cable connections of the BTS3900E.
RF Jumper of the BTS3900E
The RF jumpers of the BTS3900E are 1/2-inch jumpers. The RF jumper connects the antenna
port at the bottom of the BTS3900E to the feeder or antenna. It transfers the input and output
RF signals, and thus facilitates the signal exchange between the BTS and the antenna system.
Appearance
Both ends of the RF jumper use DIN male connectors, as shown in
Figure 5-17 RF jumper
Pin Assignment
None.
RF Cable Connections of the BTS3900E
This describes the RF cable connections of the BTS3900E. You can determine the proper RF
cable connections based on the site configuration.
Table 5-19
Different RF cables are identified by different colors.
the RF cables and their colors.
Figure 5-18 Mapping between the RF cables and their colors
Issue 01 (2010-01-15)
DIN male connector
describes the RF cable connections in different site configurations.
RF jumper of the BTS3900E
Inter-BTS3900E cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
DIN male connector
5 BTS3900E Hardware
Figure
5-17.
Figure 5-18
shows the mapping between
5-21