Table 5-3 Leds On The Bts3900E - Huawei BTS3900E GSM User Manual

5 BTS3900E Hardware
Table 5-3
states.

Table 5-3 LEDs on the BTS3900E

LED
RUN
ALM
ACT
SFP0/
SFP1
VSWR
LIU0/
LIU1
FE
5-6
lists all the LEDs on the BTS3900E and describes the indications of different LED
Color State
Green Blinking (ON for 1s and OFF
for 1s)
Blinking (ON for 0.125s and
OFF for 0.125s)
ON
OFF
Red ON
Blinking (ON for 0.5s and OFF
for 0.5s)
OFF
Green ON
Blinking (ON for 1s and OFF
for 1s)
Red and ON (green)
green
ON (red)
Red (ON for 1s and OFF for 1s) The CPRI link is out of lock.
OFF
Red OFF (red)
ON (red)
Green ON
Blinking (ON for 0.25s and OFF
for 0.25s)
OFF
Green OFF
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BTS3900E GSM
User Guide
Description
The BTS3900E works properly.
Board software is being loaded
or the board is not started.
The power input is normal, but
the board is faulty or being
started.
The BTS3900E has no power
input, or alarms are generated.
Alarms are generated, and the
BTS3900E needs to be replaced.
An alarm is generated and needs
to be cleared according to the
handling suggestion.
No alarm is generated.
The power amplifier (PA) works
properly.
The BTS3900E works properly,
but the PA does not work.
The CPRI link is normal.
Data reception is abnormal.
The SFP module is out of
position.
No VSWR alarm is generated.
A VSWR alarm is generated at
the ANTA_TX/RX port.
A local E1 alarm is generated, or
the E1 cable is not connected.
A remote E1 alarm is generated.
The BTS3900E works properly.
The FE connection is faulty.
Issue 01 (2010-01-15)