Available Accessories; Mounting Kits - ABB Relion Series Product Manual

670/650 series and SAM600-IO IEC

1. Available accessories

Mounting kits

• Mounting kits for space-saving mounting in racks,
cubicles or on walls
• IP54 protected mounting capability in cubicles for 670 and
650 series
RHGS cases
• RHGS 6, RHGS 12 and RHGS 30 cases enable mounting
of for example Combiflex modules
Test switch module
• Fail-safe testing of IEDs, using test switch RTXP 24
• Time saving while
– all connections for test are made from the front
– easy to move between IEDs of the same type
Combiflex modules
• Provide functionality such as lock-out, lock-out reset and
external contact re-enforcement
• Supervision
Key switch for settings
• Possibility to lock settings with key switch
Connectors
• Flexible connection of analog and binary signals
– Screw compression type
– Terminal blocks suitable for ring-lugs
External resistor unit
• Used with the High impedance differential protection
External current transformer unit
• Used for cost effective summation type differential
principle
Interface converter
• External interface converter from C37.94 to G703
• External interface converter from C37.94 to G703.E1
GPS antenna
• Used with the GPS time synchronization module GTM (or
GSM)
Injection equipment hardware REX060, REX061,
REX062
• Is used to inject voltage and current signals to the
generator or motor.
COMBIFLEX Injection equipment
RXTTE4 and optional protective resistor are used to inject
fundamental frequency AC voltage into the rotor circuit.
ESD Field Kit
• Used to make work ESD safe
Power Supply
• Used to supply power to the IED
Hitachi Power Grids
M1831-1 v3
SEMOD121070-2 v2
M1947-1 v2
SEMOD121075-2 v2
M1990-1 v1
M1997-1 v2
SEMOD120184-10 v2
SEMOD121078-2 v2
M1780-1 v2
SEMOD121065-2 v2
GUID-F6C11BE9-F5C7-4378-A3F0-9437B715E48A v1
GUID-BFA755D6-9CE7-4342-B4F9-4E4F525A554A v2
GUID-9C991E88-4B0E-4B1A-877A-F85E1ED192E1 v1
GUID-2613CBA7-B7D0-4037-A3FA-01CB0DC14C40 v1
© 2017 - 2021 Hitachi Power Grids. All rights reserved.
Configuration and monitoring tools
• Protection and control manager, PCM600, used to
– configure the IED
– set parameters
– monitor the IED and the system
– visualize and evaluate disturbance recordings
• Supervision and control of the power system via IEDs
(HV/Control package)
• Provides on request information from IEDs
• Collection of disturbances from IEDs
• Consists of standard library functions for easy application
engineering of a station HMI
Cable and dust cover
• The cable is used to connect a PC to the RJ45 port on the
local human machine interface
• The dust cover protects the RJ45 port
Labels
• Used to label the LEDs
SAM600-IO LHMI service kit
• The SAM600-IO LHMI service kit is a support tool for
SAM600-IO during:
– Troubleshooting
– Commissioning
– Service
– Maintenance
2. Mounting kits
19" rack mounting
Use the 19" rack mounting kit for 6U housing to mount the
IED in a standard rack. Combine the rack mounting kit with
the side-by-side mounting kit to mount IEDs or an IED and a
test switch module in the same rack position.
The 19" rack mounting kit is available in four designs,
suitable for 1/4, 1/2, 3/4 or full width cases and consists of
two rack flanges (1a) and (1b) with appropriate mounting
details (2) for fastening to the case.
1MRK 514 012-BEN K
Issued: June 2021
Revision: K
SEMOD124331-1 v1 M1890-1 v2
M2078-1 v2
GUID-17E99276-BE53-4D03-A6D8-B926C5F81F8F v1
GUID-9F23A29B-E379-4705-A87F-3D9308354974 v1
GUID-DA06ABEE-FAC7-4C7D-8912-A03FDDBEAA1D v2
M1835-3 v3 IP653-1 v1
M1840-3 v2
6