Esd Field Kit; Power Supply; Configuration And Monitoring Tools; Cable And Dust Cover - ABB Relion Series Product Manual

670/650 series and SAM600-IO IEC
type (ordering number RK795102-AD) has exactly the same
ohmic value of 220Ω as the internal RXTTE4 resistor. It
shall be used in cases where only physical exposure of the
field circuit shall be limited. The second type (ordering
number RK795102-AB) has different ohmic value than
internal RXTTE4 resistor. It shall be used in installations
where current with high harmonic content is pushed back
onto the RXTTE4 injection unit by the rotor circuit
1 2 3
IEC13000041 V1 EN-US
Figure 30. External resistor mounted on a plate

16. ESD Field Kit

ESD Field Kit
The ESD Field Kit provides a complete portable ESD safe
workstation when working in the field.
Hitachi Power Grids
X1
IEC13000041-1-en.vsd
GUID-3AEE96A2-E92B-4804-AD52-303B5222848A v1
© 2017 - 2021 Hitachi Power Grids. All rights reserved.

17. Power Supply

Portable Power Supply
The portable Power Supply provides the IED with power.
This can be used at education or demonstration of the IED.
Power Cable
For use with the portable Power Supply.

18. Configuration and monitoring tools

PCM600
Use PCM600 through all stages of a project, from
engineering, configuring and parameter setting to testing,
commissioning, documentation and maintenance. Use
PCM600 to adjust the default configuration, or to make a
new configuration. For more information about PCM600 visit
www.abb.com/substationautomation.

19. Cable and dust cover

Front communication
The front connection cable is used to connect a PC to the
RJ45 port on the local human machine interface. The cable
is a standard crossed-over ethernet cable (RJ45
connectors).
Dust cover
The dust cover is used to protect the RJ45 connector on the
local human machine interface.

20. MicroScada tools

The LIB 520 package provides the following main functions:
• User interface for the interaction with the control system
and the controlled process
• Automatic supervision and control
• Alarm and event handling
• Data acquisition, calculating and reporting
The high voltage software modules are a complement to the
standard MicroSCADA software and provides an easy-to-
build and easy-to-use HMI for supervision and control in
MicroSCADA.
The software is made for IEDs, and are providing a similar
user interface as the LIB 500/510 standard library functions.
IEC11000414-1-en.vsd
1MRK 514 012-BEN K
GUID-1E38BA0D-C36A-40D6-9BE1-1A6C3C20741C v1
GUID-6E83F62E-2E84-49D8-83B4-1EDA72047403 v1
M11607-3 v3
M1876-3 v2
GUID-EAC89866-3EE6-4561-9A77-821E00D9812F v1
M2080-3 v2
21