B30 Patient Monitor
Changing alarm sources
For NIBP, P1 and P2 (with E-PSMPW), you can select which measured values trigger the alarm.
One or several alarm sources may be active at a time.
Parameters
Blood pressure
(NIBP, P1, P2)
1.
Press the
2.
Select Adjust Limits.
3.
Select the measurement. If the desired measurement is not displayed, select Next Page.
4.
Push the ComWheel. An adjustment window is displayed.
5.
In the adjustment window, turn the ComWheel to get from the limit setting to the menu
selections.
6.
Select X Alarm and push the ComWheel to change the selection OFF or ON.
Alarms
Setup
4-8
Alarms Setup
side panel key.
Alarm triggered off by
Systolic, diastolic and/or mean pressure or off
(with off, there is no 10 minute trend on
display)