Checklist
Check that:
•
Water trap is locked into the module.
•
Water trap container is empty.
•
A new sampling line is used after each patient.
•
Sampling line is connected to the water trap.
•
Monitor is turned on and self-check is performed with the sampling line attached.
•
Sampling line is connected to the airway adapter.
•
The humidification and/or bacteria filter are in correct place.
•
Breathing circuit or accessories have no residuals of alcohol based disinfectants.
•
Desired gas parameter is selected for screen through
Airway gas (CO2)
Monitor Setup
- Screen Setup.
17-9