Definitions: Safety Guidelines; Important Safety Instructions - DeWalt DXAELJ16 Instruction Manual

Lithium automotive jump starter with usb power bank
Table of Contents

Advertisement

Available languages

Available languages

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
DEWALT TOOL, CALL US TOLL FREE AT: 1-888-394-3392.
Lithium Automotive Jump Starter with
USB Power Bank
The DXAELJ16 1600A Jump Starter and 3.1A USB Ports is a D
jump starter that features a USB-A & USB-C charging ports.
Important Safety
Instructions
1. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Avoid dangerous environments. Don't use this unit in damp or wet
locations; or in the rain or snow.
5. Clean only with a dry cloth.
6. Keep children away from the work area. Keep this unit away from
children. This is not a toy!
7. Store indoors. When not in use, this unit should be stored indoors
in a dry and high or locked-up place – out of the reach of children.
8. Stay alert. Use common sense. Do not operate this equipment
when you are tired or impaired.
9. Only use attachments/accessories specified by the manufacturer.
The use of any accessory or attachment not recommended for
use with this appliance could be hazardous.
10. Use only on a flat, level surface. If a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from
tip-over.
11. To reduce risk of electric shock, disconnect the unit from any
power source before attempting maintenance or cleaning. Turning
off controls without disconnecting will not reduce this risk.
12. Check for damaged parts. Any part that is damaged should be
properly repaired or replaced by manufacturer unless otherwise
indicated elsewhere in this instruction manual before further
use. Servicing is required when the unit has been damaged in
any way, such as power-supply cord or plug is damaged, liquid
WALT
e
has been spilled or objects have fallen into the unit, the unit has
been exposed to rain or moisture, does not operate normally, or
has been dropped. Do not disassemble the unit; return it to the
manufacturer when service or repair is required.
Opening the unit may result in a risk of electric shock or fire, and
will void warranty. Contact the manufacturer at 1-888-394-3392
for more information.
13. Unit shall not be exposed to dripping or splashing and no objects
filled with liquids, shall be placed on the unit.
14. Do not operate this unit near flammable liquids or in gaseous or
explosive atmospheres.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents