DeWalt DXAELJ16 Instruction Manual page 18

Problem Possible Solution
The Type C Port and/ Make sure the Power Button has
been pressed to turn the USB ports
or Type A USB port will
on.
not operate
If a fault condition exists in either
of the USB Ports, the unit will
automatically shut down. Refer to the
"Type C Port and Type A USB Port
Fault Conditions" section and remedy
any faults.
Make sure that the total draw of all
USB devices plugged into the USB
Ports do not exceed 3.1A (5V).
Some USB-powered household
electronics will not operate with these
USB charging/power ports. Check
the manual of the corresponding
electronic device to confirm that it
can be used with this type of USB
charging/power port.
Check that the unit has a full charge.
Recharge the unit if necessary.
The 120V AC/USB Make sure you have live AC power to
the outlet the 120V AC/USB Charging
Charging Adapter's
Adapter is plugged into.
USB port will not
operate
Make sure the rating of equipment
plugged into the charging adapter's
USB port does not exceed 2A
continuous.
Problem
The 120V AC/USB
Charging Adapter's
USB port will not
operate (Cont)
The 12V DC/USB
Charging Adapter's
USB port will not
operate /
12V DC/USB Charging
Adapter LED Indicator
does not come on
17
Possible Solution
Some household USB-powered
electronics will not operate with this
USB port. Check the manual of the
corresponding electronic device to
confirm that it can be used with this
type of USB port.
Check the connection to the 12 volt
DC power source. Make sure there is
good contact.
Confirm there is functioning DC
current.
Check the plug fuse in the 12V DC/
USB charging adapter. Replace the
fuse following the instructions in this
manual, if necessary.
Make sure the rating of equipment
plugged into the charging adapter's
USB port does not exceed 2A
continuous.
Some household USB-powered
electronics will not operate with this
USB port. Check the manual of the
corresponding electronic device to
confirm that it can be used with this
type of USB port.