8.2 Function Selection
1 Press " " for 3 seconds to display the function selection setting screen.
✓ If only one indoor unit is connected with the wired remote controller, step4 is displayed.
✓ If multiple indoor units are connected with the wired remote controller, step2 is displayed.
2 Indoor unit selecting screen is displayed.
✓ Each indoor unit has its own index number. The corresponding refrigerant system number
and address number are displayed on the upper right corner of the screen.
3 Press
to select the indoor unit by changing the "Index No". Then press " " to
" " or " "
confirm the selection.
✓ If all the indoor units are selected, the Index No. is indicated as FF.
4 Press
to select the setting item, and press " " to confirm the selection.
" " or " "
PMEN0630 rev.0 - 07/2022
Indoor Unit No.
(refrigerant system)
Address No.
of the
selected unit
Index No.
Index No.
Setting Item
(Flashing)
8
32