Table of Contents
Advertisement
Icon
NOTE
• (*1): The default setting is cooling: set temperature +2.5°C, heating: set temperature -2.5°C.
If you want to change the correction value for this setback operation, please refer to the
"Optional setting items for function selection".
• (*2): It depends on the settings of the remote controller, please refer to the "Optional setting
items for function selection".
PMEN0630 rev.0 - 07/2022
Description
"AutoBoost" mode is ON.
"On Timer" is set in the operation schedule.
"Off Timer" is set in the operation schedule.
NFC mode is ON.
NFC mode is OFF.
6
11
Advertisement
Table of Contents
