Swing Louver Direction - Hitachi ECO COMPACT PC-ARC-E Installation & Operation Manual

5.5 Swing Louver Direction

1 Press " " (On/Off). Make sure that the power is ON.
1 Press " " and select "Louver Direction".
2 By pressing " " or " ", the louver direction changes as below diagram, and the direction of
different types of louver is displayed differently.
HEAT,
FAN
COOL,
DRY
LCD
indication
: Auto swing operation will be started. At this time, the louver icon on the LCD will keep
swinging repeatedly.
3 Press " " to save the setting and return to the home screen.

NOTE
• For the indoor unit without the auto louver mechanism, the indication of "Louver" is NOT
displayed on the LCD.
• The air flow angle is different for each indoor unit type. Check for detailed information in the
technical information of indoor unit.
• The louver position on the LCD and the actual louver position may not match during the Auto-
Swing. To set the louver positions, set the angle after checking the position on the LCD.
• The louver may NOT stop immediately after the switch is pressed.
PMEN0630 rev.0 - 07/2022
Auto-swing range for HEAT and FAN
Range for HEAT and FAN
Auto-swing
Auto-swing range for COOL and DRY
Range for COOL and DRY
5
9