Panasonic FP7 Series User Manual page 53
Cpu unit
Hide thumbs
Also See for FP7 Series:
- Command reference manual (1222 pages) ,
- User manual (275 pages) ,
- Additional functions manual (45 pages)
Table of Contents
Advertisement
2.4 Expansion Master Unit / Expansion Slave Unit
Used for connecting to the IN connector of the expansion slave unit in the next block with an
exclusive expansion cable.
(3) IN connector
Used for connecting to the OUT connector of the expansion slave unit in the previous block with
an exclusive expansion cable.
(4) Power supply connector (AFP7EXPS only)
Used for connecting to an external power supply (24 V DC). When a power supply unit is used,
do not connect this.
(5) DIN hook
Used for fixing the unit on the DIN rail.
(6) Unit connector
Used for connecting the internal circuit of an I/O unit or intelligent unit. The end unit is attached
with shipment.
(7) Dip switch
Do not change the setting. The switches are all set to OFF at the factory.
(8) Fixing hook
Used for fixing a power supply unit
WUME-FP7CPUH-09
2-9
Advertisement
Table of Contents
