Panasonic FP7 Series User Manual page 131

SD29
Device
Name
No.
Ethernet communication error
SD29
code
SD30-SD39
Device
Name
No.
SD Memory Card Access
Instruction
SD30
Execution result
WUME-FP7CPUH-09
Description
Saves the error code when the Ethernet communication instruction
is executed.
SR9 SD29
0: Normal 0: Normal
1: Incorrect IP address specification
2: Incorrect subnet mask specification
3: Incorrect default gateway specification
4: Incorrect IP addresses are combined.
10: Ethernet cable disconnected
1: Error
11: Ethernet initialization in progress
12: IP address unestablished
13: Client not started
14: Connection processing in progress
15: Connection occupied
Description
Error codes while the SD memory card access instruction is
executed are stored.
Value Name
0 Normal end
1 No SD memory card
SD memory card
2
write-protected
Specified file name
3
error
4 No specified file
5 File already exists
6 File read error
7 File write error
File access position
8
error
SD memory card
9
capacity shortage
8.1 CPU Unit Specifications
Detailed information
No SD memory card is inserted,
or the cover is open.
The SD memory card is write-
protected.
Code that cannot be specified
for a file name is used.
There are too many hierarchies
for the specified folder.
The specified file does not exist.
The specified file already exists.
A write-protect attribute is set for
the specified file.
The reading position or writing
position is incorrect.
Cannot be executed because
there is not enough free space
on the SD memory card.
8-19