Panasonic FP7 Series User Manual page 132

8.1 CPU Unit Specifications
Device
Name
No.
SD31
(Not used)
-SD39
SD40-SD49
Device
Name
No.
SD40 Slot No.
COM port No.
SD41
or User connection No.
SD42
(Not used)
-SD49
SD50-SD99
Device
Name
No.
SD50 Calendar timer (year)
SD51 Calendar timer (month)
SD52 Calendar timer (day)
SD53 Calendar timer (hours)
SD54 Calendar timer (minutes)
SD55 Calendar timer (seconds)
Calendar timer (day-of-
SD56
the-week)
Total ON number of error
SD60
alarm relays
8-20
Description
Value Name
10 Read format error
File access
11
contention
The specified
12
directory is not empty.
-1 to -99 Others
Description
The slot number specified by the UNITSEL instruction operand [S1]
is stored.
CPU with built-in SCU U0: U0 to U2
CPU with built-in ET-LAN: U100
Serial Communication Unit (SCU): U1 to U64
The COM port number or user connection number specified by the
UNITSEL instruction operand [S2] is stored.
CPU with built-in SCU: U0 to U2
CPU with built-in ET-LAN: U1 to U216
Serial Communication Unit (SCU): U1 to U4
Description
● Saves year, month, day, hour, minute, second and day-of-the-week
data of the calendar timer as 16-bit binary data. The built-in calendar
timer will operate correctly through the year 2099 and support leap
years.
● The calendar timer can be set (time synch) by writing desired values
using the programming tool or a program based on calendar setting
instruction (TIMEWT).
Saves the total number of error alarm relays that are on. (Max. 4096
relays). By specifying SD60 in RST instruction, all data in the error
alarm buffer can be cleared.
Detailed information
Error in the conversion format
when reading a file.
A file that is being logged is
specified.
A file that is being accessed via
FTP is specified.
A directory or a file exists under
the directory to be deleted.
WUME-FP7CPUH-09